[3D PARTS] helloBEEprusa 3D printer KIT printed parts

The versatility of an entry-level 3D printer, engineered to last.
By BEEVERYCREATIVE and Hello 3D Printing World
stig.joergensen
Posts: 32
Joined: 16 Mar 2016, 21:23

Re: [3D PARTS] helloBEEprusa 3D printer KIT printed parts

Post by stig.joergensen » 19 Sep 2016, 09:08

It cant be the same.

the tower is mirrored. Eg the right side is a mirror of the left side, so - look at the smoothrods, the threaded rod and the mounting screw.

I seriously doubt it can be the same.

/Stig

Filipe

Re: [3D PARTS] helloBEEprusa 3D printer KIT printed parts

Post by Filipe » 19 Sep 2016, 09:18

Sorry stig,

It was the reply I got, but I will make further inquiries.
(I don't have a helloBEEprusa, so my knowledge is limited)

I will get back to you as fast as possible.

stig.joergensen
Posts: 32
Joined: 16 Mar 2016, 21:23

Re: [3D PARTS] helloBEEprusa 3D printer KIT printed parts

Post by stig.joergensen » 19 Sep 2016, 09:37

Thanks

But just to clarify things

this picture:
Image

look at the two yellow things at the top - one n each side, these are the ones im talking about..

there you can clearly see, that they are a mirror.

I appreciate you time and effort...

thanks

Filipe

Re: [3D PARTS] helloBEEprusa 3D printer KIT printed parts

Post by Filipe » 19 Sep 2016, 09:59

I think you are supposed to mirror the part. Since they look exactly the same, just a mirror "image".

Or print it, but flip it.

No?

It's just a guess.

User avatar
DNeves
Posts: 264
Joined: 09 Oct 2015, 10:32
Location: Portugal

Re: [3D PARTS] helloBEEprusa 3D printer KIT printed parts

Post by DNeves » 19 Sep 2016, 10:28

stig.joergensen wrote:It cant be the same.

the tower is mirrored. Eg the right side is a mirror of the left side, so - look at the smoothrods, the threaded rod and the mounting screw.

I seriously doubt it can be the same.

/Stig

Hi Stig,

I can confirm what Filipe said. I might upload some close ups later :) But the Z top part is the same.

stig.joergensen
Posts: 32
Joined: 16 Mar 2016, 21:23

Re: [3D PARTS] helloBEEprusa 3D printer KIT printed parts

Post by stig.joergensen » 19 Sep 2016, 14:33

Just checked the zip file again that i downloaded from git...

and i still cant see the two object

https://postimg.org/image/3mtk1zq4l/
Image

Neither the top or the bottom for the z smooth rod... neither as stl or step.

User avatar
DNeves
Posts: 264
Joined: 09 Oct 2015, 10:32
Location: Portugal

Re: [3D PARTS] helloBEEprusa 3D printer KIT printed parts

Post by DNeves » 19 Sep 2016, 14:59

Ok, I understand now. Those yellow parts that you speak of in the image above yes, they are mirrors!

But why don't you upgrade to the new (and better) version of the Z-axis support?

These parts are available on the github.
Image

stig.joergensen
Posts: 32
Joined: 16 Mar 2016, 21:23

Re: [3D PARTS] helloBEEprusa 3D printer KIT printed parts

Post by stig.joergensen » 19 Sep 2016, 15:10

As far as i can tell, the newer version dont fit on my version - at least at the bottom, there is a coupler and or end stop mounter there.

ps. for some reasons im not able to see the pictures on postimg...

Filipe

Re: [3D PARTS] helloBEEprusa 3D printer KIT printed parts

Post by Filipe » 20 Sep 2016, 09:06

stig.joergensen wrote:As far as i can tell, the newer version dont fit on my version - at least at the bottom, there is a coupler and or end stop mounter there.

ps. for some reasons im not able to see the pictures on postimg...
It appears they changed things a bit....
Was having trouble seeing a gallery on their site yesterday.
Think the link are working now.

shawnj78
Posts: 1
Joined: 10 Jan 2018, 11:45

Re: [3D PARTS] helloBEEprusa 3D printer KIT printed parts

Post by shawnj78 » 10 Jan 2018, 11:49

3D printers is so good to use and this post is so helpfull to me thanks.

Post Reply